EXM-31 Hardware ReferencePage 284 4STORED PROFILE 0B1 B16 B30 B41 B60 E` L2 M1 N1 P Q0 V1 W0 X4 Y0 &B1 &C1 &D2 &G0 &J0&K0 &L0 &P0 &Q0 &R0 &S0 &U0 &X0%A013 %C1 %E1 %G0 %01 \A3 \C0 \G0 \J0 \K5 \N3 \Q3 \T000 \V0 \X0 -J1 *H3*O016S00:000 S02:043 S06:002 S07:030 S08:002 S09:006 S10:014 S11:095S12:050 S18:000 S25:000 S26:001 S37:000 S112:000TELEPHONE NUMBERS:&Z0 = &Z1 =&Z2 = &Z3 =Result Codes:OK n=0,1.Error Otherwise&Wn Store Active Profile.This command stores certain command options and S register values into one of thetwo nonvolatile stored profile memory locations.&W0 Save active configuration as user profile 0.&W1 Save active configuration as user profile 1.Result Codes:OK n= 0 or 1Error Otherwise&Xn Synch Transmit Clock Source OptionThis command determines how the DTE transmit clock is generated while the modemis in synchronous modes.&X0 The modem generates the transmit clock and applies it to pin15 (RS232)&X1 The DTE generates the transmit clock on pin 24 (RS232) and themodem applies it to pin 15 (RS232).&X2 The modem derives the transmit clock from the receive carriersignal and applies it to pin 15 (RS232).
