RadiSys EXM-31 Hardware Reference Manual
                                                                  | |
Contents
| 
Programming InterfacePage 514 40-9 Digits 0 through 9A-D TONE DIALING ONLY* The star sign: tone dialing only# The pound sign: tone dialing onlyT Select tone dialing: affects current and subsequent dialingP Select pulse dialing: affects current and subsequent dialing< Short dial pause: period controlled by S8: the modem will pausebefore dialing the digits following “<“= Long dial pause: period twice as long as the short dial pause: Wait for dial tone: the modem will wait for dial tone before dialingthe digits following “:”& Flash: the modem will go off-line for 0.25 s. then return on lineCRS Dial Stored NumberThe modem will go on-line, dial according to the dial string entered in the dial stringmemory addressed, and attempt to establish a connection.0-2 Dial string memory addressDIC Disable AutoanswerThe modem, though configured for autoanswer, will disregard the incoming call. Ifthere is no incoming call or autoanswer is not enabled, the modem will issue theinvalid message, the command not being applicable to the subsequent incoming calls.PRN Store Telephone NumberThe modem will store the dial string specified into the dial string memory referenced.0-2 Dial string memory address: Separator: inserted between dial string memory address and dialstringx..x Dial string: A string of dial characters. An empty string clears theidentification memory referenced. The maximum length of the dialstring is 18 characters. The following characters are accepted:0-9, A-d, *, #, T, P, <, >, +, :, &. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine