EXM-31 Hardware ReferencePage 544 4LSN List of Stored Numbers (Dial Strings)The modem will return this message in response to the RLN command.LSN 0 Response to RLNLSN 1LSN 2VAL ValidThe modem will send this message when it successfully executes the command issuedand there is no other applicable response (message or circuit transition).Result CodesThe EXM-31 responds to commands with result codes, which may be numerical orEnglish-language phrases. Numerical responses consist of a numerical character fol-lowed by a CR (carriage return) character. Phrase responses are preceded andfollowed by a CR/LF character sequence. The result codes are shown in thefollowing table. For additional result code information refer to S Register 95.DigitCode Word Code Meaning0 OK Command line executed successfully1 CONNECT Connection successful2 RING Ringing signal detected3 NO CARRIER Carrier lost or not present4 ERROR Invalid command, checksum, command line, orcommand-line length5 CONNECT xxxx Connection at stated bps6 NO DIALTONE No dial tone detected7 BUSY Busy signal detected8 NO ANSWER No silence detected when dialing a system notproviding a dial toneTable 5. Result Codes.
