Radio Shack DX-398 Owner's Manual

17• If you enter an invalid time, theclock beeps twice and E (error)appears for about 1 second.Repeat Steps 3–4 to enter thecorrect time.5. Press ENTER . The time youset appears, and the secondsstart counting from 0.Note: The receiver does not dis-play the seconds.VIEWING A WORLD TIMEImportant: You need to set your localtime before following these steps. See“Setting and Viewing the Local Time”on Page 16.1. Repeatedly press WORLD/HOMEuntil flashes.2. Rotate MANUAL TUNING until thename of the world city (or a city inthe same time zone) appears. Thecurrent time in that city appearson the display.3. To save the displayed city as yourworld city, press ENTER .stops flashing. Then, theworld city’s name disappears fromthe display within 2 seconds.4. To return to your home time,repeatedly press WORLD/HOMEuntil flashes. Your homecity’s name and the time in thatcity appear.5. Press ENTER . stopsflashing.CHANGING A WORLDCITY NAMEYou can change the name of any ofthe preprogrammed world cities to aname you choose, then save the newname in the receiver’s memory.1. Repeatedly press WORLD/HOMEuntil flashes.2. Turn MANUAL TUNING to select acity in the same time zone as thecity you want to change.3. Press EDIT. The first character ofthe city’s name flashes.4. Turn MANUAL TUNING to selectthe desired character.5. When the character you wantappears, press TUNING tomove to the next position, thenturn MANUAL TUNING to enter thenext character (up to 8 charac-ters).Note: If you want to correct acharacter you entered, press TUN-ING to move back to it.6. Press ENTER . The receiverstores the name of the world cityyou entered.WORLDWORLDHOMEHOMEHOME