Radio Shack DX-398 Owner's Manual

30Note: If you wait more than 20seconds to turn MANUAL TUNING,the cursor stops flashing. If thishappens, start again at Step 4.6. When the character you wantappears, press TUNING tomove to the next position, thenrotate MANUAL TUNING to selectthe next character.Note: If you want to correct acharacter you entered, press TUN-ING to move back to it.7. When you have finished enteringthe name, press ENTER .DELETING A STATIONYOU STORED1. Select a band (see “Selecting aBand” on Page 18).2. Press ENTER .3. Repeatedly press PAGE until thepage with the desired frequencyappears.4. Use the number keys to enter thememory location number.5. Press M/MEM.6. Press C (cancel).LOCKING/UNLOCKING ASTORED STATIONAfter storing your favorite stations, youcan lock any of them in memory. Thishelps you avoid overwriting the stationif you accidentally use the receiver’sATS automatic store feature.To lock or unlock a station, recall thestation, press M/MEM then press. appears (locked) or dis-appears (unlocked).MOVING A FREQUENCYTO ANOTHER MEMORYLOCATIONNote: These steps show you how tomove a frequency to another memorylocation on the same page. To movethe frequency to another memory lo-cation on a different page, follow thesteps in “Storing FM, MW, or LW Fre-quencies in Memory” on Page 27 or“Storing SW Frequencies in Memory”on Page 28.1. Select a band (see “Selecting aBand” on Page 18).2. Recall the memory location num-ber of the frequency you want tomove.3. Press M/MEM. MEMO and thememory location where the sta-tion is programmed flash.M