17Glide-out™ GrillBefore you remove any of the grill parts forcleaning make sure that they are cool.The grill pan and grid should be washed in hotsoapy water. After grilling meats or any foods thatsoil, leave to soak for a few minutes in the sinkimmediately after use. Stubborn particles may beremoved from the grid by using a nylon brush.Alternatively the grill pan can be washed in a dishwasher.To remove the grill pan support frame, pull the grillpan forward.Lift the grill pan clear of the support frame.The support frame is held to the side rails by twoclips on each side.For each side, support the side rail with one handand with the other hand lift the frame up and out ofthe side clips.For safety, push the side rails back into the grillchamber.The side rails can beremoved to makecleaning the grillchamber easer byunhooking them fromthe grill chamber sides.Slides can be wiped clean with soft cloth and milddetergent.Do not use any abrasive substance.DO NOT put the side runners in a dishwasherWhen you have finished, hook the side rails backonto the sides of the chamber. To refit the framepull the side rails forward and for each side in turnsupport the side rail and press the frame down intothe side rails. Replace the grill pan.Control Panel and DoorsAvoid using any abrasive cleaners includingcream cleaners, e.g. Cif, on brushed Stainless Steelsurfaces. For best results use a liquid detergent e.g.Domestos Multi Surface Cleaner.The control panel and control knobs should onlybe cleaned with a soft cloth wrung out in clean hotsoapy water. Wipe with a clean dampened cloththen polish with a dry cloth. The oven doors shouldonly be cleaned with a soft cloth wrung out in cleanhot soapy water.