Rangemaster Classic 110 Installation And User Manual

Also see for Classic 110: User guide User guide User's guide & installation instructions User guide & installation & service instructions User's guide & installation instructions

14Cleaning your cookerHotplate burnersSome models have a separate trim ring, which fitson the burner head.The burner heads and caps can be removed forcleaning. Make sure they are absolutely dry beforereplacing.The LH hotplateWhen refitting the burner head, make sure that thenotch lines up with the electrode or hole in thebase. Check that the burner head is level and thatthe cap is fitted centrally on the burner head.The Wok burnerThe Wok burner is a little more complicated but italso can be taken apart for cleaning.Essential informationBefore thorough cleaning isolate the electricitysupply. Remember to switch on the electricitysupply before use.Never use paint solvents, washingsoda, caustic cleaners, biologicalpowders, bleach, chlorine basedbleach cleaners, coarse abrasives orsalt. Don’t mix different cleaningproducts - they may react togetherwith hazardous results.Recommended cleaning materials areshown in the chart below.If you want to move your cooker for cleaning,see the section called ‘Moving your cooker’.All parts of the cooker can be cleaned with hotsoapy water - but take care that no surpluswater seeps into the appliance.‡ Indicates how to clean after the oven liningshave been removed. See opposite page for howto remove the oven linings* VEA is the Vitreous Enamel Association. Lookfor aerosols with the VEA label.