Regency P36E-NG10 Owners & Installation Manual

Contents

Regency P36E-NG10 Owners & Installation Manual Manual pdf 45 page image

P36E-10 Zero Clearance Direct Vent Gas Fireplace | 4545|installationOPTIONAL VIGNETTE INLAY INSTALLATION919-559 05.21.151. Remove Inner Vignette Frame from unit if already installed.2. Line up the inlay top bracket in the space between the safetyscreen frame and Vignette Frame. Slide the Inlay bracket up until itrests on the inside edge of the Vignette Frame.OPTIONAL VIGNETTE INLAYCompleted Install3. Position the Inlay so it is exactly centered from side to side and topto bottom within the Inner Vignette Frame.4. With the top of the Inlay in correct position–push the studs at thebottom of the Inlay through the actual screen.NOTE: Ensure Inlay is in correct position before pushing studs throughthe safety screen.5. Secure the Inlay in position with supplied brackets, washers, andnuts as shown.Bracket(supplied)Nut + washer(supplied)StudLine up Inlay–Push studs onInlay through screenInlay topbracketStuds at back ofVignette InlayBack of InnerVignette FrameNOTE: Inlay not exactly as shown below.