10 Fan Coil FC600 Instruction ManualM MPress arrows to check setpoint After 1 sec Set point will flashMPress Up/Down to increase/decrease setpointMPress OK to save and exitFor programmable thermostatMThe thermostat will now return to home screen and it will follow new setpoint.It now operates in Temporary Override mode. Once the mode is activated,the LCD will display the calendar and hand icons After enteringthis mode, the thermostat will use this temporary override setpoint to controlroom temperature until next Program start time. Then it goes backs fromTemporary Override to Program mode.If press Mode Button during Temporary Override, it will get canceled andthe thermostat will enter previous mode.MNote: If you are using the Mode Button, please make sure that thermostat is following the appropriate Heatingor Cooling mode (if both are available).You can use the Fan Button to adjust the fan speed.MPress to select fan speedAnimation MeaningFan is not activeWhen the fan is running, the fan icon is animatedFan speed: Low, Medium, HighFan speed on Auto / Off. When fan is Off all dotsand Auto icon disappearsBy default, the fan is on only when the Fan Coil calls for heating or cooling.Note: In program mode, the default fan mode is automatic. The fan mode can be changed to Manual bypressing the Fan Button. The fan will not return to the auto mode until the next program time.2.6 Fan control00:0000:00.00:00MMMMM