Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL December 1996MMC: 705 ASSIGN SYSTEM SPEEDDIALDESCRIPTION:Enables the assignment of system speed dialing numbers. There are 500 entries available forprogramming.Each speed dial number consists of a trunk or trunk group access code followed by a separatorand up to 18 digits to be dialed. These dialed digits may consist of 0–9, Q and #. If the systemrecognizes a valid trunk or trunk group access number, it will automatically insert the separator.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryB Used to insert a flash code "F"C Used to insert a pause code "P"D Used to insert a pulse/tone conversion code "C"E Used to mask/unmask following digits. shows as "[" or "]"F Used to enter name for speed dial bin (see MMC 706)ACTION DISPLAY1. Press TRSF 705Display showsSYS SPEED DIAL500:2. Dial speed index desired (e.g., 505)ORPress UP or DOWN key to make selection andpress RIGHT soft key to move cursorSYS SPEED DIAL505:3. Enter access code ( e.g., 9/701) plus the phone numberup to 18 digits (digits will scroll under)and press RIGHT soft key to return to step 2SYS SPEED DIAL505:9–1212234567894. Press F key to toggle to MMC 706 step 3 to enter name SYS SPEED NAME505:5. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: NONERELATED ITEMS: MMC 706 SYSTEM SPEED DIAL BY NAMEMMC 606 ASSIGN SPEED BLOCK