Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL December 1996MMC: 110 KEYSET ON/OFFDESCRIPTION:Allows the system administrator to set any of the keyset features listed below.0. AUTO HOLD Automatically places an existing C.O. call on hold if a CALL button,trunk key or trunk route key is pressed during that call.1. AUTO TIMER Automatically starts the stopwatch timer during a C.O. call.2. HEADSET USE When on, this feature disables the hookswitch allowing a headsetuser to answer all calls by pressing the ANS/RLS button.3. HOT KEYPAD When on, this feature allows the user to dial directory numberswithout having to first lift the handset or press the SPK button.4. KEY TONE Allows the user to hear a slight tone when pressing buttons onhis/her set.5. PAGE REJOIN Allows the user to hear the latter part of page announcements ifhis/her keyset becomes free during a page.6. RING PREF. When off, requires the user to press the fast flashing button toanswer a ringing call after lifting the handset.7. CALL COST. If enabled (ON), LCD shows real time call cost calculated based onMetering Pulses arrived.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRSF 110Display shows[201] STN ON/OFFAUTO HOLD :OFF2. Dial keyset number (e.g., 205)OR[205] STN ON/OFFAUTO HOLD :OFFPress UP or DOWN to select keyset andpress RIGHT soft key to move cursorORPress ANS/RLS for ALL [ALL] STN ON/OFFAUTO HOLD :?3. Dial option number from above list(0–5, e.g., 3)[205] STN ON/OFFAUTO HOLD :OFF