Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL December 1996MMC: 716 NETWORK CODEDESCRIPTION:This MMC provides secondary network access code when the call is routed to the secondarynetwork . Maximum entries are up to 16 and 10 digits maximum in length each.NOTE:The second entry may be selected as a primary secondary network. By default, 132(MCL DigitalAccess). If dialed digits are not matches to the entry in the LCR DIGIT TABLE (MMC 710) andstarted with 0, then the network code in the second entry will be dialed out by the system prior totransmitting dialed digit.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryACTION DISPLAY1. Press TRSF 716Display showsNETWORK CODE1:1212. Enter in index number (e.g., 3)ORPress UP or DOWN key to make selection and pressRIGHT soft key to move cursorNETWORK CODE3:1613. Enter the desired access in via dial keypadPress RIGHT soft key to enter and return to step 2 andenter more entriesNETWORK CODE3:1634. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: 1: 1212: 1323: 161RELATED ITEMS: MMC 710 LCR DIGIT TABLEMMC 711 LCR TIME TABLEMMC712 LCR ROUTE TABLEMMC 713 LCR MODIFY DIGIT TAB