Samsung DCS-VIP User Manual

Also see for DCS-VIP: User guide Quick guide

Contents

DCS-VIP User Guide44Trunk Features SetupThis explains how to set up the trunk features. Select the TRUNK PAGES menu onthe ADVANCE SETUP ➛➛➛➛ KEYPHONE menu screen. Then, you will see TRUNKPAGES screen consisting of following 13 submenus.So Mapping Co Line Number Distinctive Ring Trunk AbandonTrunk Name Trunk ring Trunk timer ISDN OptionMSN Digit SO Option TRUNK ON/OFF BRI S/TBRI RESTARTThis section will describe how to setup functions for 13 submenus.S0 MappingS0 MappingS0 MappingS0 MappingOn the S0 Mapping screen you can select the trunk number for each station.Click the SO Mapping dropdown button for each station, select the connectedtrunk number and click the Set button.CO Line NumberCO Line NumberCO Line NumberCO Line NumberOn the CO Line Number screen, you can enter the CO Line number. CO (CentralOffice Trunk) Line number is given by the telephone service provider.Enter the CO telephone number into the CO Line No. parameter for each trunk andclick the Set button.Distinctive RingDistinctive RingDistinctive RingDistinctive RingOn the Distinctive Ring, you can select a Ring tone or Cadence to distinguish aparticular call from another. Use Ring tone for digital phones and Cadence fornormal phones.Select ring tone and ring cadence for each station and click the Set button.! Tone : Select a ring tone for each station.− F-STN : Ring according to the station’s ring tone.− 1-8 : Ring with the selected ring tone.! Cadence : Select a cadence for each station.− F-STN : Ring according to the caller’s SLI Ring Cadence.− 1-8 : Ring with the selected cadence.Trunk AbandonTrunk AbandonTrunk AbandonTrunk AbandonOn the Trunk Abandon screen, you can select whether to save information aboutabandoned trunk calls.To save the caller’s information for each trunk in the SMDR and the Report TrunkAbandon List, tick the Report Trunk Abandon parameter. Click the Set button.Trunk NameTrunk NameTrunk NameTrunk NameOn the Trunk Name screen, you can assign a name to a trunk.Enter the trunk name into the Trunk Name parameter for each trunk and click theSet button. For the trunk name you can enter any character up to 11 charactersmaximum.