Samsung DS-5000 User Manual

Also see for DS 5000 Series: User guide User instruction User guide Quick reference guide User instructions

Contents

12RECALL DIAL TONEPress the NEW button to disconnect your existing call, wait for dial tone and thenmake a new call on the same line.NOTE: If this button does not appear on your keyset, the FLASH button may beprogrammed to recall dial tone.SENDING A FLASHWhile on an outside call, press the FLASH button to send a flash to the telephonecompany. This is required for some custom calling features or CENTREX use.NOTE: Flash is not available on an ISDN circuit.BUSY LINE QUEUING WITH CALLBACKIf you receive a busy signal when you are selecting an outside line, this means thatthe line or group of lines is busy.• Press the CBK button, if programmed, or dial 44. You will hear confirmationtone.• When the line becomes free, the system will call you back.• Lift the handset or press the SEND button to answer, wait for dial tone and dialthe telephone number or speed dial number again.NOTES:1. A callback will be canceled if not answered within 30 seconds. If you have seta callback, your CBK button will light.2. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before dialing.CANCELING CALLBACKA callback will be canceled if not answered within 30 seconds. If you have set acallback, your CBK button will light.Your phone may have a maximum of five callbacks to lines and/or stations set at atime. To cancel a callback:• Press the CBK button, if programmed, or dial 44. You will hear confirmationtone.• While you are listening to confirmation tone, press the HOLD button. This willcancel the oldest set callback.NOTE: If the hot keypad feature is turned off, you must first lift the handset or pressthe SPEAKER button before dialing.