RETURNING MESSAGES• Press the MESSAGE button or dial 43. The first station that left a message willbe called automatically. If that station does not answer, your MESSAGE lightwill stay on.• Repeat until all messages have been returned in the order received.• Your MESSAGE light will turn off when all messages have been returned.NOTES:1. Display keyset users can view message indications and return them in anyorder. See Viewing Message Indications under Display Features.2. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.3. If a message has been left at your keyset by a keyset in Auto Answer, you mustmanually cancel the message after it has been returned.PROGRAMMED MESSAGESWhen you will be away from your phone for any length of time, you can leave aprogrammed station message. Display stations calling you will see this messageand be informed of your status or follow your instructions.• Dial 48 plus any of the message codes (01–20) listed on the back of this userguide.• To cancel any of these messages you might have selected, dial 48 plus 00.• Press TRANSFER to exit and store your selection.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button.You can have multiple programmed message buttons (PMSG) and each one canhave a different message code:• Press any programmed message (PMSG) button. The message is set and thebutton will light red. Press the button again to turn off.• Pressing another programmed message (PMSG) button will turn the previousone off and set a different programmed message.31