MANUAL RETRY WITH REDIALWhile you are on an outside call listening to a busy signal and you want to redialthe same number dialed.• Press the REDIAL button.This will hang up your existing call and manually redial the same number dialed.You can repeat this operation for a limited number of attempts.NOTE: If your keyset is programmed with Call Log Blocks then the Redial willaccess the call log when pressed.SAVE NUMBER WITH REDIALTo save the number you just dialed for later use, press the SNR button beforehanging up.To redial this saved number at any time, press the SNR button or dial 17.The sameline will be selected for you.NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.2. The saved telephone number is stored in memory until you save anothernumber.3. Redial does not apply to intercom calls.CHAIN DIALINGYou may manually dial additional digits following a speed dial number or chain asmany speed dial numbers together as required:• After the first speed number is dialed, press MEMORY again and dial anotherspeed number OR manually dial additional digits following a speed dial num-ber.AUTOMATIC REDIAL/RETRYWhen you are making an outside call and you receive a busy signal, the systemcan automatically redial the number for you. It will automatically redial at a pre-programmed interval for up to 15 attempts.• When you hear a busy signal, press the RETRY button.• The system will reserve the line and automatically redial the same number foryou.You will hear the call being made through the keyset speaker.The micro-phone is muted.26