• Receive page tone and dial a desired page zone number.• Make announcement indicating your extension number or the line number.Hang up.To retrieve an automatically parked call:• Dial 10 plus the number that was announced. If you have a PAGPK button,press it and dial the number that was announced. If you have a PARK button,press it and dial the announced orbit number.• You will be connected to the parked call.NOTES:1. If the call is not retrieved within a pre-programmed period of time, it will recallyour keyset and have a slow flashing amber light. You cannot park and pageintercom calls.2. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.SETTING A MESSAGE INDICATIONWhen you are calling another station and no one answers or you receive a busysignal, you can leave a message indication:• Press the MESSAGE button or dial 43 and receive confirmation tone.• Hang up. The MESSAGE button on the called station will light. Standard tele-phones receive special dial tone as a message indication or a lit messagelamp, if the phone is equipped with one and they are connected to an 8MWSLIcard (not available on the OfficeServ 100 or OfficeServ 7000 Series) or a16MWSLI card on the system.NOTES:1. A station can have up to five message indications.2. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.CANCELING MESSAGESTo cancel a message indication that you left at another station, dial 42 plus theextension number of the station at which you left a message. To cancel all mes-sage indications left at your keyset, dial 42 plus your extension. Your MESSAGElight will go out.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.30