19ENGLISHENGLISH18Connecting to a Stereo ComponentWhen you connect the DVD player to an audio system, you can listen to higher quality sound.n Analog Connection• When connecting to an audio component, set the “Dynamic Comp.” to “Off”. (see page 54)2-CH Audio PlaybackJack/Plug ColorAudio (left): WhiteAudio (right): RedAudio CableAudio AmplifierConnect to input jackYou can enjoy high-resolution video using an S-VIDEO cable when connecting your DVD playerto a TV equipped with an S-VIDEO input jack.• Always turn off the DVD Player and TV before you connect any cables.Caution• If you wish to view video on your TV only, close the display panel of your DVD player.Playback will continue and audio to the speakers will be cut off.• With the display panel shut, use the remote to control the DVD player.• For power saving, press the LCD ON/OFF button to power off the LCD display.To view video with a TV1. Turn on the TV.2.Adjust the TV input to the one that your DVD player is connected to (“AV”, “VIDEO”).3. Turn on the DVD player, and start playback.Connecting to a TVJack/Plug ColorVideo: YellowAudio (left): WhiteAudio (right): RedConnect to a TV equipped with external connection jacks
