17ENGLISHENGLISH16Connecting to an External Component (Input Select)You can enjoy video from your VCR or camcorder on your DVD player.Important!• Always turn off the DVD Player and other components before you connect any cables.• Refer to owner ’s manual of the components you are connecting for more information on those particular components.• In the AV-IN mode, the video input must be the standard PAL or NTSC.Otherwise LCD screen may be occured flicker or noise etc.When connecting to an external componentJack/Plug ColorVideo: YellowAudio (left): WhiteAudio (right): RedVCR or other component equipped with external output connectorsYou can attach headphones with a stereo mini-jack plug (not supplied) to thePHONES jack for private listening. There are two jacks available.Connecting Headphones to the DVDHow to use headphones1.Insert headphones into the PHONES jack.• This jack is a stereo mini-jack.Important!• Turn the headphone volume down to the minimum setting before connecting.Caution• Once you connect headphones to the DVD, your DVD Player’s speakers will be disconnected.2.Adjust the volume level by using the VOLUME control dial.Not supplied