Getting Started 13To turn your device off:1. Press and hold the Power/Lock Key untilthe Device options screen displays.2. Touch Power off to turn off the device.3. At the Power off prompt, touch OK.Locking and Unlocking the Screen1. Press to lock the touch screen.2. Press again to display the lock screenthen swipe your finger across the screen to unlock.Note: Swipe is the default screen locking method. To changeyour screen lock, see “Home Screen” on page 169.Setting Up Your DeviceWhen you first turn on your device, you are asked to set up afew things. To do that, several screens display. Somescreens can be skipped (touch Skip) or redisplayed (touchBack). Some screens display depending on the options youchoose.1. When you first turn on your device, the Let’s set up yourdevice! screen displays.2. The default language for your device is English. If youwould like to select Spanish, touch Español on thebottom right side of the screen.3. Touch Terms & Conditions, read the End User LicenseAgreement for Ready2Go, then touch Back.4. Touch get started.– or –Touch Remind Later and then touch exit to set up yourdevice later. You can access Ready2Go by touchingApps ➔ AT&T Ready2Go.5. Read and follow the instructions on each screen to setup your device.
