BasictroubleshootingLearn to solve cornmon problems by setting shooting options,Tile s_bject s eyess_@ear redF_t/otos t/ave @_stspotsPhotos are bh_rredPhotos are blurredwhen shoo@sg atnight8ubiecte come outtoo dark becs_se olbackHghtingRed eye occurs when the subject's eyes reflect light from the camera flash.• Set the flash option to _ Red-eye or c__Red-eye Fix, (p, 62)• If the photo has already been captured, select Red-eye Fix inthe edit menu, (p, 97)If dust particles are present in the air, you may capture them in photos when you use the flash.• Turn off the flash or avoid capturing photos in a dusty place,• Set ISO sensitivity options. (p. 64)Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly,• Use the OIS function or half press [Shutter] to ensure the subject is focused, (p. 33)• Use the DUAL ISmode, (p, 43)As the camera tries to let in more light, the shutter speed slows. This can make it difficuit to hold thecamera steady long enough to take a clear picture and may result in camera shake.• Select Night Shot mode, (p, 41)• Turn on the flash, (p, 62)• Set ISO sensitivity options, (p, 64)• Use a tripod to prevent your camera from shaking,When the light source is behind the subject or when there is a high contrast between light and darkareas, the subject may appear too dark.• Avoid shooting toward the sun,• Select Baeklight in Scene mode. (p. 41)• Set the flash option to _ Fill in. (p. 62)• Adjust the exposure. (p. 73)• Set the Auto Contrast Balance (ACB) option, (p, 74)• Set the metering option to [] 8pot if a subject is in the center ot the frame, (p, 74)