Samsung OfficeServ 7200 Installation Manual
Also see for OfficeServ 7200: System administration guideUser guideUser instructionUser guideUser manual
                                                                                                                       |
OfficeServ 7200 Installation Manual© SAMSUNG Electronics Co., Ltd. 7-237.2.5 Connecting Web ManagementSince OfficeServ 7200 with MP20S is equipped with the web server of Web Management,it supports the remote access through the network. The system administrator can change thesystem setting after getting access to Web Management by using a browser.This section describes how to access OfficeServ 7200 with MP20S.If the in-housing network is established, connect LAN to the LAN port of MP20S andattempt the access in a client PC.Setting Network parameter by using the MMC830 programSet the network parameter of OfficeServ 7200 with MP20S. For the setting value of thenetwork parameter, contact the network administrator.1) Set the IP address of OfficeServ 200 with MP20S.2) Set the subnet mask of OfficeServ 200 with MP20S.3) Set the gateway address of OfficeServ 200 with MP20S.4) Reset the board.About the board resetTo apply new setting, the board should be reset.Getting access to Web Management from a client PC1) Execute your browser. (Internet Explorer 5.5 or higher)2) Access Web Management by using the LAN IP address.Access address: https://[System IP Address]Figure 7.26 Web Management Initial Screen |
Related manuals for Samsung OfficeServ 7200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine