OHVA BLOCKYour keyset can be programmed with an OHVA Block (BLOCK) button. Pressingthis button will prevent anyone from making an OHVA to you until you press thebutton again and cancel the blocking.OHVA REJECTYour keyset can be programmed with an OHVA Reject (REJECT) button. Pressingthis button while receiving an OHVA call will disconnect the voice announcingparty and return you to your original call.IN GROUP/OUT OF GROUPIf your keyset is assigned to a station ring group, you can remove your keyset fromthe group and then put it back in. While you are out of the group, you can receivecalls to your extension number but not calls to the group number. If you have anIN/OUT button with the group number assigned.• Press the IN/OUT button. It will light red when your keyset is in the group.• Press the IN/OUT button again to exit the group and turn the light off. Repeatas necessary.If you do not have an IN/OUT button:• Dial the IN/OUT access code number ________________, then the groupnumber, then 0 to exit the group or 1 to enter the group.NOTE: If the Hot Keypad feature has been turned off, you must first lift the hand-set or press SPEAKER button.The IN/OUT button can include an extender to indicate the specific group thatthis button will affect. This means that if you are in multiple groups, you can de-cide for which groups you will receive calls.42
