Samsung OfficeServ ITP-5121D User Manual

Also see for OfficeServ ITP-5121D: User guide User instruction User guide User instructions User guide

Contents

45Your keyset may be equipped with a Headset mode button. If it is so equippedpressing this button while the light is out will cause the keyset to enter headsetmode and the light will illuminate to indicate this. Pressing the button while thelight is lit will cause the keyset to return to handset mode and the light will go out.HOT KEYPADOn your phone system your keyset’s keypad can be made “live” or “hot” so that it isnot necessary to lift the handset or press the SPEAKER button before you begindialing. Calls can be made and features activated by simply dialing the C.O. linenumber, trunk group access code, intercom number or feature access code. To ac-tivate this feature:• With the handset on-hook, press TRANSFER and then dial 110.• Dial 031 to turn the Hot Keypad on or 030 to turn it off.• Press TRANSFER to store your selection.KEY CONFIRMATION TONEYou can hear a short beep (confirmation tone) each time you press a button on thedial pad. This tone can be turned on or off.• While on-hook, press TRANSFER and then dial 110.• Dial 040 to turn tones off or 041 to turn tones on.• Press TRANSFER to store your selection.REJOINING A PAGEThis feature allows you to hear the remaining portion of an ongoing internal pageafter you return your keyset to idle. To enable this feature:• With the handset on-hook, press TRANSFER and then dial 110.• Dial 051 to turn this feature on or 050 to turn it off.• Press TRANSFER to store your selection.RING PREFERENCEThis feature automatically answers ringing calls when you lift the handset or pressthe SEND button.This method will always answer calls in the order they arrived atyour keyset.When you turn ring preference off, you must press the flashing buttonto answer a call, allowing you to answer calls in the order you choose.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 061 to turn ring preference on or 060 to turn it off.• Press TRANSFER to store your selection.