Receiving a fax1628. FaxingWhen the machine receives a fax in this mode, Print will be activated. If youwant to print the secured faxes, press Print. All secured faxes will be printedout.4 If you want incoming faxes to go into memory always, press Whole Day.Otherwise, go to the next step.5 Set Start Time by pressing the + and - buttons. Press OK.6 Press End Time, and set the specific end time using the up/down or left/right arrows. Then press OK.7 Press OK from the display screen.To deactivate the Secure Receive feature, press Off. In this case, thereceived fax will be printed out.17Printing received faxes on both sides of the paperSet this duplex feature to save paper. When the machine prints the received faxdata, it prints them on both sides of the paper.1 Press Machine Setup > Application Settings > Fax Settings >Received Fax Printing > Duplex from the display screen.2 Press the appropriate option.• Off: Prints on only one side of the paper.• Long Edge: Prints on both sides of the paper; however, the bindingwill be the long edge.• Short Edge: Prints on both sides of the paper; however, the bindingwill be the short edge.3 Press OK.18Receiving faxes in memorySince your machine is a multi-tasking device, it can receive faxes while you aremaking copies or printing. If you receive a fax while you are copying or printing,your machine stores incoming faxes in its memory. Then, as soon as you finishcopying or printing, the machine automatically prints the fax.
