28414. MaintenanceInstalling accessories4Precautions• Disconnect the power cordNever remove the control board cover while the power is turned on.To avoid the possibility of an electrical shock, always disconnect the powercord when installing or removing ANY internal or external accessories.• Discharge static electricityThe control board and internal accessories (memory module) are sensitiveto static electricity. Before installing or removing any internal accessories,discharge static electricity from your body by touching something metal,such as the metal back plate on any device plugged into a grounded powersource. If you walk around before finishing the installation, repeat thisprocedure to discharge any static electricity again.When installing accessories, the battery inside the machine is a servicecomponent. Do not change it by yourself. There is a risk of an explosion ifbattery is replaced by an incorrect type. Your service provider shouldremove the old battery from your device and dispose of it in accordancewith the relevant regulations in your country.5Setting Device OptionsWhen you install the optional devices such as optional tray, memory, etc, thismachine automatically detects and sets the optional devices. If you cannot usethe optional devices you installed in this driver, you can set the optional devicesin Device Options.1 Click the Windows Start menu.• For Windows 8, from Charms, select Search > Settings.2 For Windows® XP Service Pack 3 /2003, select Printers and Faxes.• For Windows 2008/Vista, select Control Panel > Hardware andSound > Printers.• For Windows 7, select Control Panel > Hardware and Sound >Devices and Printers.• For Windows 8, search for Devices and Printers.• For Windows Server 2008 R2, select Control Panel > Hardware >Devices and Printers.3 Right-click your machine.4 For Windows® XP Service Pack 3 /2003/2008/Vista, press Properties.For Windows 7, For Windows 8, and Windows Server 2008 R2, fromcontext menus, select the Printer properties.
