I NSTALLING S OFTWARE2.4Installing Samsung SoftwareNOTES :• For Windows 95/98/Me/NT 4.0/2000/XP users, cancel the “FoundNew Hardware Wizard” screen when the computer boots up.• Make sure that your machine is plugged in and connected to yourcomputer’s parallel port or USB port before installingsoftware from the CD. Windows 95 and Windows NT 4.0 do notsupport USB connection.1 Insert the supplied CD-ROM into your CD-ROM drive.The CD-ROM should automatically run and the openingwindow appear.If the installation window does not appear, click Start, andthen Run. Type X:Setup.exe, replacing “X” with the letterof your drive, and click OK.2 If the following window opens, connect your machine to thecomputer and turn the printer on. Then click Next.If the machine is already connected and turned on, thisscreen does not appear. Skip to the next step.NOTE : If you click Next and the machine is not connected to themachine, an alert message window appears. After connecting themachine and turning it on, click Yes. Or, if you want to install thesoftware without the machine, Click No.
