COPYING4.122 Make sure that you have selected the required paper tray.See page 4.2.3 To enter Margin shift feature, press Menu until you see“Copy Features” on the top line of the display.4 Press the scroll buttons to display “Margin Shift” on thebottom line and press Enter.5 Press the scroll buttons to select the option you want andpress Enter to save the selection. The following options areavailable:•Off: This feature is disabled.•Auto Center: automatically copy in the center of thepaper.•Left Margin: enter the left margin using Number keypad.•Right Margin: enter the right margin using Numberkeypad.•Top Margin: enter the top margin using Number keypad.•Bottom Margin: enter the bottom margin using Numberkeypad.For details about selecting margin unit, refer to page 1.20.6 Press Enter to save the selection.NOTE : The document loaded on the DADF always copies in thecenter of the paper.7 If necessary, you can customize the copy settings includingcopy size and image type using the control panel buttons.See “Setting Copy Options” on page 4.6.8 Press Start to begin copying.9 When the copying is completed, press Stop/Clear tocancel Margin Shift feature.Copying BooksThe Book Copy feature allows you to copy an entire book. If thebook is too thick, lift the cover until its hinges are caught by thestopper and then close the cover. If the book or magazine isthicker than 30 mm, start copying with the cover open.1 Load the document to be copied on the document glass,and close the cover.
