5.17FAX5Receiving Automatically in ANS/FAX ModeFor this mode, you must attach an answering machine to theEXT jack on the back of your product (see page 1.9 ).1 Press Receive Mode on the front panel repeatedlyuntil you see “ANS/FAX”. Then, press Enter.2 When you receive a call, the answering machine willanswer.If the caller leaves a message, the answering machinestores the message as it would normally. If your producthears a fax tone on the line, it automatically starts toreceive the fax.NOTES :• If you have set your product to ANS/FAX mode and youranswering machine is switched off, or no answering machineis connected to your product, your product will automaticallygo into FAX mode after predefined rings. The ring count mayvary depending on your country.• If your answering machine has a ‘user-selectable ringcounter’, set the product to answer incoming calls within 1ring.• If you are in TEL mode (manual reception) when theanswering machine is connected to your product, you mustswitch off the answering machine, or the outgoing messagefrom the answering machine will interrupt your phoneconversation.