1.44 SETUPSetting the Handset ModeYou can activate the PIN code to restrict the use of thehandset by setting the handset mode to ON. This will blockthe outgoing calls from your product by unauthorisedpersons.NOTE: Before enabling this feature, you must enable the PINcode by restricting colour copy. See page 1.43.1 Press Setup on the front panel. The display shows“1.SYSTEM SETUP” on the bottom line.2 Press Enter.3 Press the Scroll buttons ( or ) repeatedly until yousee “HANDSET MODE”, and press Enter.4 Press the Scroll buttons ( or ) repeatedly to selectthe desired setting.If you want to restrict calls from your product, select“ON”. Otherwise, select “OFF”.5 Press Enter to save the selection.You will be required to enter the four-digit code eachtime you lift the handset.