1.41SETUP14 Enter the desired discard size using the number keypad.Anything within the margin set will be discarded fromreceived or copied pages.If the data is outside the margin set, it will be printed ontwo sheets of paper at the actual size.5 Press Enter to save the selection and return to Standbymode.Setting SoundsYou can set the following sounds:• Ringer volume: You can adjust the ringer volume. Choosefrom HIGH, MED, LOW, or OFF. The OFF setting turns theringer off.• Alarm sound : You can turn the alarm sound on or off. If setto ON, an alarm sounds when an error occurs.• Key sound : You can turn the key tone on or off. If set toON, key tone are heard when a key is pressed.• Speaker volume: You can adjust the volume of the speakerto desired level.Ringer Volume, Alarm Sound, Key Sound1 Press Setup on the front panel. The display shows“1.SYSTEM SETUP” on the bottom line.2 Press Enter.3 Press the Scroll buttons ( or ) repeatedly until yousee the desired sound you want to set and then pressEnter.4 Press the Scroll buttons ( or ) until you see andhear the desired volume setting on the display and thenpress Enter to save the selection.
