4.2 SCANScanning BasicsYour SF-430 offers three ways to start scanning. Theseinclude:• From the Samsung SmarThru software: Launch SamsungSmarThru and open the Scan Wizard to start scanning.Please refer to the SmarThru User’s Guide.• From the front panel on your product: Use the Scan Tobutton on the front panel to initiate scanning. TheSmarThru system launches automatically on your PC andthe Scan Wizard window opens on the desktop window.• From TWAIN-compliant software: You can use othersoftware including Adobe PhotoDeluxe and AdobePhotoshop.NOTES:• To scan with your product, you must install the MFP driver.• Scanning is done through the same LPT or USB port that iscurrently assigned for your printer port.Starting Scan from the Front PanelYou can quickly start scanning from the front panel on yourproduct. The Samsung SmarThru program automaticallylaunches and allows you to select the desired scan service.Take the following steps:1 Make sure that your computer and SF-430 are turnedon. You will see the scan monitor icon on the taskbar atthe bottom right corner of the desktop window unlessyou disable or have turned it off.Scan monitor
