xiiReplacing the Fitted Plug (for UK Only)ImportantThe mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse.When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replacethe fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.Please contact the people from you purchased the machine.The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings(mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do notremove the moulded plug.WarningIf you cut off the moulded plug, get rid of it straight away.You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.Important warning: You must earth this machine.The wires in the mains lead have the following color code:• Green and Yellow: Earth• Blue: Neutral• Brown: LiveIf the wires in the mains lead do not match the colors marked in your plug, do the following:You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’or colored green and yellow or green.You must connect the blue wire to the pin which is marked with the letter “N” or colored black.You must connect the brown wire to the pin which is marked with the letter “L” or colored red.You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
