BASIC FUNCTIONS 2.92To set up the DRPD mode:1 Press Menu until “Fax Setup” appears on the top line of the display.The first available menu item, “Receive Mode,” displays on the bottomline.2 Press the scroll button (W or X) until you see “DRPD Mode” on thebottom line and press Enter.3 When “Set” displays on the bottom line, press Enter.The LCD displays ‘[Waiting Ring].”4 Call your fax number from another telephone. It is not necessary toplace the call from a fax machine.5 When your machine begins to ring, do not answer the call. Themachine requires several rings to learn the pattern.When the machine completes learning, the LCD displays “End DRPD[Setup]”.If the DRPD setup fails, “DRPD Ring Error” appears. Press Enter when“DRPD Mode” displays and retry from Step 3.6 To return to Standby Mode, press Stop/Clear.When the DRPD feature is set up, the DRPD option is available in theReceive Mode menu. To receive faxes in the DRPD mode, you need to setthe menu to DRPD.N OTES:• DRPD must be set up again if you re-assign your fax number, or connect themachine to another telephone line.• After DRPD has been set up, call your fax number again to verify that themachine answers with a fax tone. Then have a call placed to a differentnumber assigned to that same line to be sure the call is forwarded to theextension telephone or answering machine plugged into the EXT. jack.:Receiving Faxes in the MemoryYour machine can receive faxes while you are making copies or printing areceived fax. If you receive a fax while you are copying, your machinestores incoming faxes in the memory. Then, as soon as you finish copying,the machine automatically prints the fax.