TROUBLESHOOTING6.42 Gently pull the paper out of the front output tray. Skip to step 6.If there is any resistance and the paper does not move when you pullor if you cannot see the paper in the front output tray, continue to step3.3 Open the rear cover.4 Remove the jammed paper by gently pulling it straight out.5 Close the rear cover.6 Open and close the front cover to resume printing.In the Fuser Area or Around the Toner CartridgeN OTE: The fuser area is hot. Take care when removing paper from the machine.1 Open the front cover and pull the toner cartridge out, lightly pushing itdown.2 Remove the jammed paper by gently pulling it straight out.3 Replace the toner cartridge and close the front cover. Printingautomatically resumes.