BASIC FUNCTIONS 2.152Automatic DialingOne-touch DialingThe 20 one-touch buttons on the control panel lets you store frequently-used fax numbers and dial a number automatically with a touch of a button.Storing a Number for One-touch Dialing1 Press and hold one of the one-touch dial buttons for about 2 seconds.The display asks you to enter the fax number. “T” signifies that you areassigning a one-touch dial button.If a number is already stored in the location you chose, the displayshows the number to allow you to change it. To start over with anotherone-touch button, press Stop/Clear.2 Enter the number you want to store using the number keypad andpress Enter.To insert a pause between numbers, press Redial/Pause. A “-”appears on the display.If you make a mistake while entering a number, press the W buttonand re-enter the correct number.3 To assign a name to the number, enter the name you want. For detailsabout entering characters, see page 1.14.If you do not want to assign a name, skip this step.4 Press Enter when the name appears correctly or without entering aname.5 To store more numbers, press a one-touch button and repeat steps 2through 4.To return to Standby mode, press Stop/Clear.Sending a Fax using a One-touch Number1 Load the document(s) face down into the ADF.For details about loading a document, see page 2.2.2 Adjust the document resolution to suit your fax needs. See page 2.3.If you need to change the darkness, see page 1.20.3 Press the one-touch button where you stored a number.The document scans into the memory.4 The machine dials the fax number stored in the one-touch dial locationand the document is sent when the remote fax machine answers.