25Getting Started24Getting StartedSwitching the Phone On or Off1. Press and hold the key until the phoneswitches on.2. If the phone asks you to enter a password,enter the password and press the OK softkey. It is preset to “00000000” at the factory.For further details, see page 188.3. If the phone asks for a PIN, enter the PIN andpress the OK soft key. For further details, seepage 189.The phone searches for your network and,after finding it, the idle screen appears on thedisplay, as shown below. Now, you can makeor receive a call.Note: The display language is preset to Englishat the factory. To change the language,use the Language menu (Menu 7.5).For further details, refer to page 144.4. When you wish to switch the phone off, pushthe slider up and press and hold the keyuntil the power-off image displays.Service ProviderFri 05 SepMenu NameUsing the Keypad Lock FeatureYou can push the slider up to use the numberkeypad and back down to make the phonecompact.When you push the slider down back in place,the display turns off and the phone automaticallylocks the keypad to keep it from being pressedaccidentally.When you press and hold down the key orone of the Volume keys on the left side, thedisplay turns on and shows “Keypad Locked.” Tounlock the keypad, press and hold the Unlocksoft key. The keypad is activated and you canuse the phone’s functions.
