Sound Settings131130Alert Type (Menu 6.3)This menu allows you to specify how you are tobe informed of incoming calls and alarms youset.The following options are available:Light Only: the service light flashes; the phoneneither rings nor vibrates.Melody: the phone rings using the selected ringor alarm melody.Vibration: the phone vibrates but does not ring.or alarm melody.Vibra+Melody: the phone first vibrates threetimes and then starts ringing.Keypad Tone (Menu 6.4)This menu allows you to select the tone that thephone sounds when you press a key.To turn the sound off, select Off.Sound SettingsYou can use the Sound Settings feature tocustomise various settings, such as the:• ring melody, volume and type.• sounds made when you press a key, receive amessage, push the slider up/down or switchyour phone on/off.• alert tone made every minute during a call,when you make an error or when your call isconnected to the system.Notes:• You can quickly enter the Sound Settings menuby pressing the Up key in Idle mode.• When the phone is in Silent mode (see page32), you cannot change the sound settings.Ring Tone (Menu 6.1)Note: You can quickly enter this menu by pressingand holding the Up key in Idle mode.This menu allows you to select a ring melody.You can choose between many differentmelodies. If you have downloaded sounds fromthe Internet or EasyGPRS programme, you canuse them in this menu.Ring Volume (Menu 6.2)This menu allows you to adjust the ring volumeto one of five levels.Use the Up and Down keys or the Volume keyson the left side of the phone to increase ordecrease the volume.
