Samsung Series 4 User Manual

Also see for Series 4+: User manual User manual User manual User manual User manual

Contents

English - 21Setting up the TV with your PCPreset: Press theN SOURCE button to select PC mode.Auto Adjustment❑Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC videosignal. The values of fine, coarse and position are adjusted automatically.This function does not work in DVI-HDMI mode.NPress theT TOOLS button to display Tools menu.You can also set the adjustment by selecting Tools → Auto Adjustment.Screen❑CoarseAdjusts the frequency when vertical noise appears on the screen.FineAdjusts the screen to be clearer.PC PositionAdjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust theHorizontal-Position.Image ResetYou can replace all image settings with the factory default values.Changing the Mode❑Provides the function to turn on the 3D Effect. You can choose between Mode1 andMode2. To achieve the 3D effect, the 3D glasses shutter back and forth from the left toright and vice versa (left/right sync).Off• : Turns the 3D Effect function off.Mode1• : Mode 1 operates with right sync first.Mode2• : Mode 2 operates with left sync first.2D• : Provides picture converted 3D to 2D. You can choose this to watch 2Dpicture temporally when you feel dizzy, but you should choose Off to end 3D Effectcompletely.If the 3D effect is not working properly, it means the Mode and 3D glasses may notNbe syncing properly. To put them in sync, switch to the other mode.Changing the Format❑Select the optimal input format to match your graphic cards or 3D Software.Checker Board• : If the output format of your graphic card or 3D software isCheckerboard, select this input format.Horizontal• : If the output format of your graphic card or 3D software is Horizontal interleaved, select this input format.Vertical• : If the output format of your graphic card or 3D software is Vertical interleaved, select this input format.Picture Reset → Reset Picture Mode / Cancel❑Resets all picture settings to the default values.Select a picture mode to be reset. The reset is performed for each picture mode.NPicture OptionsSize : 16:9Screen Mode : 16:9Digital NR : AutoHDMI Black Level : NormalFilm Mode : OffScreen Burn Protection3D Effect ▶ReturnEnterMove▲3D EffectMode : OffFormat : Checker Board ▶ReturnEnterMoveScreenCoarse 50Fine 44PC PositionImage ResetReturnEnterMoveBrightness : 45Sharpness : 50Auto Adjustment ►ScreenAdvanced SettingsPicture OptionsPicture ResetPicturePictureAdvanced SettingsPicture OptionsPicture Reset ►Picture