Samsung Series 4 User Manual

Also see for Series 4+: User manual User manual User manual User manual User manual

Contents

English - 31Anynet❑ + MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of theDVD recorder will appear.(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menuof the DVD recorder will appear.Record: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that support therecording function.)(*recorder) Reserve Recording Enables reserving a recording for the recorder. (This is only available for devices that support therecording reservation function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, itNwill be represented as (*device_name).TV Remote Control Buttons Available in Anynet+ Mode❑Device Type Operating Status Available ButtonsAnynet+ DeviceAfter switching to the device, when themenu of the corresponding device isdisplayed on the screen.Numeric buttons▲/▼/◄/►/ENTERE buttonsColour buttons / EXIT buttonAfter switching to the device, whileplaying a file(Backward search) / (Forward search) (Stop) / (Play) /(Pause)Device with built-in TunerAfter switching to the device, when youare watching a TV programme P / buttonAudio Device When Receiver is activated = / buttonM MUTE buttonThe Anynet+ function only works when the active source on the TV remote control is set to TV.NTheN button works only while in the recordable state.You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.NThe TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.NThe Anynet+ functions do not operate with other manufacturers’ products.NTheN , operations may differ depending on the device.RecordingYou can make a recording of a TV programme using a Samsung recorder.1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).2. Press the ▲ or ▼ button to select Record: (device_name), then press the ENTEREbutton. Recording begins.When there is more than one recording deviceNWhen multiple recording devices are connected, the recording devices are listed.Press the ▲ or ▼ button to select a recording device and press the ENTEREbutton. Recording begins.When the recording device is not displayedNSelect Device List and press the red button to search devices.You can record the source streams by selectingN Record: (device_name).Pressing theN button will record whatever you are currently watching. If you are watching video from another device, the videofrom the device is recorded.Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna toNa recording device, refer to the recording device’s users manual.View TVDevice ListRecord : DVDRDVDR MENUDVDR INFOReceiver OnSetupU Move L Adjust R Return