Samsung UN55C8000 User Manual

Also see for UN46C8000: Available Apps User manual User manual User manual User manual

Advanced FeaturesRecordingYou can make a recording of a TV Program using a Samsung recorder.1. Select Recording.When there are more than two recording devices" When multiple recording devices are connected, the recording devices are listed. Select one recording device inthe Device List,When the recording device is not displayed, select Device List and press the Red button to search devices.2. Press the EXIT button to exit.You can record the source streams by selecting Recording: (devicename).Pressing the [_q (REC)button will record whatever you are currently watching. If you are watching video fromanother device, the video from the device is recorded.Before recording, check whether the antenna jack is properly connected to the recording device. To properlyconnect an antenna to a recording device, refer to the recording device's users manual.Listening through a ReceiverYou can listen to sound through a receiver (i,e Home Theater) instead of the TV Speaker.1. Select Receiver and set to On.2. Press the EXIT button to exit.If your receiver supports audio only, it may not appear in the device list.The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIOOUT (OPTICAL} jack of the TV.When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. Whenthe TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is adigital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard fromthe receiver.NOTE" You can only control Anynet+ devices using the TV remote control, not the buttons on the TV." The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device." The Anynet+ functions do not operate with other manufacturers' products.Using the ARC functionYou can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.1. Select Receiver and set to On.2. Press the EXIT button to exit.To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMIIN 2 (ARC} port.To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiverwill be blocked from receiving the signal.6 English