Basic FeaturesPicture Options(_ MENU iTR _ Picture _ Picture OptionsENTER [_In PC mode, you can only make changes to the ColorTone, Size and Auto Protection Time,NOTE" When Double (_, iiq) mode has been set in PIP(Picture-in-Picture), the Picture Size cannot be set." After selecting Zoom1, Zoom2 or Wide Fit:1. Press the I_ button to select Position.2. Press the ENTERIZ_ button.3. Press the A or T button to move the picture upor down.4. Press the ENTERIZ_ button.5. Press the I_ button to select Reset.6. Press the ENTERIZ_ button to reset the pictureto its default position." After selecting Screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) mode, you may need tocenter the picture:Ill Color Tone (Cool / Normal / Warm1 / Warm2)Warm1 or Warm2 will be deactivated when the picturemode is Dynamic.Settings can be adjusted and stored for each externaldevice connected to an input on the TV.Ill Size: Your cable box/satellite receiver mayhave its own set of screen sizes as well.However, we highly recommend you use16:9 mode most of the time.16:9 : Sets the picture to 16:9 wide mode.Zoom1: Use for moderate magnification.Zoom2: Use for a stronger magnification.Wide Fit: Enlarges the aspect ratio of the picture to fitthe entire screen.Available with HD 1080i / 720p signals in 16:9mode.4:3 : Sets the picture to basic (4:3) mode,Do not watch in 4:3 format for a long time. Tracesof borders displayed on the left, right and center Illof the screen may cause image retention(screenburn) which are not covered by the warranty.Screen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i/1080p) or Component(1080i / 1080p) signals are inputted.1. Press the _ or I_ button to select Position.2. Press the ENTERI_ button.3. Press the A, _r, _ or I_ button to move thepicture.4. Press the ENTERE_ button.5. Press the _ or I_ button to select Reset,6. Press the ENTERI_ button,HD (High Definition): 16:9 - 1080i/1080p (1920x1080),720p (1280x720)Settings can be adjusted and stored for eachexternal device you have connected to an input onthe TV.ATV,AV, 16:9, Zoom1,Component (480i, 480p) Zoom2, 4:3DTV(1080i), 16:9, 4:3, Wide Fit,Component (1080i, 1080p), Screen FitHDMI (720p, 1080i, 1080p)PC 16:9, 4:3Digital Noise Filter (Off / Low / Medium / High / Auto/ Auto Visualisation): If the broadcast signal receivedby your TV is weak, you can activate the Digital NoiseFilter feature to reduce any static and ghosting that mayappear on the screen.When the signal is weak, try other options until thebest picture is displayed.Auto Visualisation: When changing analog channels,displays signal strength.Only available for analog channels.When bar is green, you are receiving the bestpossible signal.8 English