Other InformationCaution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your childrendo not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries ordeath. Follow all safety precautions provided on the included Safety Flyer. For added stability, install theanti-fall device for safety purposes, as follows.AccessoriesTo prevent the -iV from failing1. Remove the screw attached to the back of your TV, then connect the Holder-TV to the TV with the screw.Make sure to only use the supplied screw.2, Firmly fasten the screw to the wall or cabinet where the TV is to be installed. Tie the W-Holder attached to the TV and thescrew fastened on the wall or cabinet so that the TV is fixed.Only the screw needed to attach the holder to the TV is supplied. The screw to attach the Holder to the wall orcabinet must be purchased separately. We recommend purchasing a size M4xL20 wood screw.Install the TV close to the wall so that it does not fall.When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.Check the cord occasionally to make sure it is secure.Before moving the TV, separate the connected cord first.3,\Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have anydoubt about the security of your connections, contact a professional installer.0 English