Seeseparateguideforinstallingthestand._ (M4 LS)9EA X_____________________________________________________________________________________________________________________StFellow the steps below to connect the TV to the stand+i TopviewScrews(M4X L8)...... .yI+_ I'GuideStand........... __ i_Stand--- _ iRear _......._ ............1. Connect the Guide Stand to the Stand using four screws (M4 X L8) as shown.c ++ ................ "2. With your TV upright, connect the TV to the Stand. 3.Screws(M4X LS).....V+Fasten two screws (M4 X LS) at position O, and thenfasten three screws (M4 X L8) at position O.NOTE+ Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.+ Make sure that at least two persons lift and move the LED TV.+ Stand the product up and fasten the screws+ If you fasten the screws with the LED TV placed down, it may lean toone side.English 5