Samsung WEC8500 Maintenance Manual

Also see for WEC8050: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

WEC8500/8050 Maintenance Manual Version 5.1Samsung Electronics America page 12 of 871.1.3 Booting failure due to file system errorThis occurs if an error occurs in the booting partition installed on the disk or in the filesystem while the APC is booting which leads to the kernel loading failure.SymptomsThe ‘system kernel loading fail (status: 1)’ log is displayed during booting process and thesystem restarts 3 times. Then, the system goes to the shell environment of the boot loader.##### BOOTING START #####Looking for valid bootloader image....(Omitted)boot partition: 1Enter password to stop autoboot.** Bad partition 1 **system kernel loading fail (status: 1)(Omitted - Retry the same process for three times when the board isreset)boot partition: 1Enter password to stop autoboot.** Bad partition 1 **system kernel loading fail (status: 1)Fail from partion 1 now we boot from partition:2Setting boot partition to: 2Writing tuple type 61441 to addr: 0x40** Bad partition 2 **Error: Bad gzipped dataargv[2]: coremask=0xffargv[3]: endbootargs## No elf image at address 0x20700000system kernel loading fail (status: 2)bootoctlinux: fail to boot up linux kernel (rcode: 1)###############################################################################Bootloader failed to load kernel and reset the system to recover fromfault.Check your system non-volatile storage device and package images.###############################################################################Octeon wec8500#