Samsung WEC8500 Maintenance Manual
Also see for WEC8050: Operation manualOperation manualOperation manualOperation manualOperation manual
                                                                                       | |
Contents
|
WEC8500/8050 Maintenance Manual Version 5.1Samsung Electronics America page 61 of 873.1.3 AP registration errorSymptomsThe AP information is not registered.WEC8500# show ap summaryAP Mgnt interface IP : 10.10.10.11 (vlan1.110)AP_ID Profile AP_NAME MAC_Address IPv4AddrState Location====== ========== ================== ================ ===================== ===========Possible CausesThe AutoDiscovery function is off and the AP information is not registered.Checking and Solving the Problem1) Check if the AP information (MAC information is used as the identifier of each AP) isregistered in the APC.2) Check if the AutoDiscovery function is enabled.[Checking the AutoDiscovery Function] If the AutoDiscovery function is enabled for the APC, when an AP sends a discoveryrequest to the APC, it is automatically registered. The registered information is not deleted. If the AutoDiscovery function is disabled, the AP information must be manuallyregistered in the APC.WEC8500/configure# show apc capwap summary===== Capwap Summary =====capwap control source port number : 5246capwap data source port number : 5247capwap control DTLS mode : Supportcapwap WindowSize : 10capwap ChangeStatePendingTimer : 25capwap DataCheckTimer : 30capwap DtlsSessionDelete : 1capwap RetransmitInterval : 5capwap WaitDTLSTimer : 60capwap WaitJoinTimer : 60capwap DiscoveryDeleteTimer : 10capwap MaxRetransmit : 5capwap MutalAuth : Enable |
Related manuals for Samsung WEC8050
manualsdatabase
Your AI-powered manual search engine