WEC8500/8050 Maintenance Manual Version 5.1Samsung Electronics America page 71 of 874.2 Cannot Detect Unauthorized APsWhen an unauthorized AP is connected to the wireless network, it cannot be detected as arogue AP.SymptomsInformation of the specific unauthorized AP is missing in the Wireless Intrusion Device APlist displayed by the following command.WEC8500# show wi device ap list managedWEC8500# show wi device ap list unmanagedPossible CausesThe function for detecting unauthorized APs is not enabled.The wireless channel used by the unauthorized AP is not included in the setting.Solutions1) Check if the function for detecting unauthorized APs is enabled.WEC8500# show wi current-config2) Check the operational state of rfsgw. If unauthorized AP detection does not work when the wids process is enabled, checkthe RFSGW state.3) Check the operational state of the AP monitor module. If the wids process and rfsgw are normal but unauthorized APs cannot be detected,check message generation at the AP.
