Samsung WF457ARG series User Manual

Also see for WF457ARG SERIES: User manual User manual Troubleshooting guide

Contents

20_ Installing your washerInstalling your washerINSTALLING YOUR WASHERBefore STEP 5 is complete, do not plug the power cord into a wall socket.Packaging materials can be dangerous to children; keep all packaging material (plastic bags,polystyrene, etc.) well out of the reach of children.Installation flow chartSelecting alocationRunning a Calibration mode(Refer to the followingdescription)Finish theinstallationRemoving the shippingbolts (*Drum only)Connecting the waterand the drainAdjusting thelevelling feetPowering your washingmachine[Running a test cycle]Run a test cycle (Rinse+Spin) withsmall amount of laundary(about 4~5 Towels)YesPleasecheck againbeforesteps.NoDoesyour washerhave excess vibrationor noise?STEP 1Selecting a locationBefore you install the washer, make sure the location:• Has a hard, level surface without carpeting or flooring that may obstruct ventilation Isaway from direct sunlight• Has adequate ventilation• Is not exposed to freezing temperatures (temperatures are never below 32 °F or 0 °C)• Is away from heat sources such as oil or gas• Has enough space so that the washer doesn’t stand on its power cordSTEP 2Removing the shipping boltsBefore installing the washing machine, you must remove allshipping bolts from the back of the unit.1. Hold the shipping bolt with your hand and pull it throughthe wide section of the hole. Repeat for each shipping bolt.2. Fill the holes with the supplied bolt hole covers.3. Store the shipping bolts in a safe location where they canbe easily retrieved in the event that you have to move thewashing machine in the future.CAUTIONWARNING