Samsung WF457ARG series User Manual

Also see for WF457ARG SERIES: User manual User manual Troubleshooting guide

Contents

36_ Washing a load of laundryWashing a load of laundry7. The My Cycle “None1” is changed to “J’sWash” in the My Cycle list on the CycleSelection screen.Starting a My CycleFollow the steps below to start a My Cycle to wash your laundry.1. Tap the My Cycle button in the Cycle Selection screen. It will expand and show a list of 3My Cycle buttons.2. Tap a my Cycle button.3. Press the Start/Pause button to start your wash.Using the Delay Start functionBy activating the Delay Start function, you can set your washer to start your wash automaticallyat a specified later time.ActivatingFollow the steps below to activate the Delay Start function.1. Tap the delay Start OFF ( ) button locatedat the bottom right of the Cycle Selectionscreen. The Delay Start screen is displayed.2. Tap the up / down arrows to set a time.3. If the Smart Grid function is available, you can allow your washer to find the most energyefficient time (called the most eco-friendly time) to run your wash within a range of the timeyou set.4. Tap the OK button to activate the Delay Start function with the options you set.Tap the Cancel button to cancel the function.5. You are returned to the Cycle Selection screen. You will see that the delay Start OFF ( )button has been changed to the delay Start ON ( ) button.DeactivatingFollow the steps below to deactivate the Delay Start function.1. Tap the delay Start ON ( ) button located at the bottom right of the Cycle Selectionscreen. The Delay Start function is deactivated and the button changes to thedelay Start OFF ( ) button.