Samsung WF457ARG series User Manual

Also see for WF457ARG SERIES: User manual User manual Troubleshooting guide

Contents

42_ Washing a load of laundryWashing a load of laundryViewing and changing the override timeFollow the steps below to view and change the override time.1. Tap the Settings button at the bottom right ofthe Cycle Selection screen.2. The Settings screen is displayed.3. Tap the Smart Grid button in the Settingsscreen.4. Tap the Override section.5. Tap an override time.6. Tap the OK button to apply the changes.7. You are returned to the Settings screen.When the smart grid is unavailable for yourneighborhood, the description as shownin the figure on the right is displayed in theSmart Grid screen.When the Smart Grid function is unavailablebecause of a problem with your power utility,the description as shown in the figure on theright is displayed in the Smart Grid screen.ATC (AUTO TEMPERATURE CONTROL)ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).Because there are numerous water temperatures depending on the customer’s environments(coldareas, warm areas, various water temperature, settings of heater temperature, etcs), ATC function inour washer maintains the certain level of wash temperature to output the best washing performance ateach cycle.If you select normal & heavy duty course, those courses are the regulation and UL course. Since newwasher must reduce the amount of energy usage at first priority, customer will notice more cold waterentering the washer. But This is Normal, not a problem.In those regulation course, Hot temperature is similar to acceptable adult bath-water temperature andwarm temperature is similar to comfortable swimming-pool water temperature.If customer want to wash clothes in specific water temperature, customer should choose a differentcourse at each temperature(Hot/Warm/Eco Warm)